Motor blocking is a common fault, the treatment method is as follows:
Cut off the power supply: after finding the motor blocking, the power supply should be cut off immediately to prevent the motor from continuing to run, so as not to damage the motor and equipment.
Examine the cause of the fault: check whether the various parts of the motor are normal, such as bearings, mechanical parts, wire connections are loose or broken, etc., to find the cause of the fault.
Repair or replace the parts: according to the actual situation, repair or replace the faulty parts to ensure the normal operation of all parts of the motor.
Restart the motor: after confirming that all parts of the motor have been operating normally, reconnect the power supply and start the motor for trial operation to ensure that the motor operates normally.
It should be noted that, before the motor blocking should be carried out regular maintenance, timely cleaning of the motor inside and outside, check the use of various components to prevent failure. At the same time, in the process of use should also avoid overloading the motor, pay attention to protect the motor.
